<Previous> <Home> <Next>
Copyright © 2003 David Hoelzeman
Last Updated: March 8, 2003
Propeller Shafts |
|
The slip joint on both propeller shafts are the same on my truck. There should be a cork gasket that fits around the shaft behind the actual yoke. This gasket is held in place with a retainer. The retainer has four tabs that are crimped to the yoke. When installing the yoke look for the two alignment arrows on the yoke and the shaft itself. These arrows should be in alignment when the yoke is correctly positioned. | ||
|
<Previous> <Home> <Next> |
|||
|
Copyright © 2003 David Hoelzeman |
|||